Aerotech Advantage® Fans
36″ and 48″
Advantage Fans
The Advantage® fan line is built for performance and reliability utilizing a number of features. This is the fan for producers who demand the best value.
The cast aluminum 3-blade airfoil-design propeller moves more air per watt than stamped steel blades. The high airflow performance (CFM) reduces the total fan requirements and have certified CFM/Watt air performance ratings by BESS Lab. The high efficiency continues inside the fan with capacitor-start/capacitorrun motors totally enclosed for protection from the environment. Exclusive motor/bearing supports are streamlined for minimal air resistance while providing solid 4-way support.
The durability continues on the outside with tapered housings and extended cones to smooth the airflow and dramatically improve efficiency. The housing bottom slopes out toward exterior drain holes to keep the building drier.
Contact USGR for more information.
PRODUCT INFORMATION
- High airflow performance reduces total number of fans needed
- Certified CFM/Watt air performance numbers by BESS Lab
- Cast-aluminum 3-blade airfoil propeller
- Tapered housings and extended cones
- Housing bottom slopes outward
- High-efficiency enclosed motors
- Stainless steel hardware
- PVC coated guards
- Exclusive motor/bearing supports
Rugged AeroLink PlusTm belts
Reduced vibration, wear and stretching add up to long life. In addition, AeroLink Plus belts eliminate the need for a belt tightener.
High quality belt tightener
For a low maintenance alternative Aerotech offers a simple automotive style belt tightener designed to reduce wear on drive components and keep a constant tension for optimal performance. The belt is constructed of aramid fiber for long wear and durability in harsh environments.
Larger-diameter pulleys
Large pulleys provide greater belt wrap. This means belt tension can be lower without slippage, so there’s less stress that reduces the life of belts and bearings.
The bottom line is Aerotech quality and efficiency doesn’t cost more. It pays, year after year.
| 0.0″ SP | 0.05″ SP | 0.10″ SP | 0.15″ SP | BESS Lab No. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Catalog No. |
Prop. Dia. |
Drive Type |
Motor HP |
Prop RPM |
Max. BHP |
CFM | CFM Watt | CFM | CFM Watt | CFM | CFM Watt | CFM | CFM Watt | |
| AT36ZC AT365ZC |
36″ 36″ |
Direct Belt |
1/2 1/2 |
850 770 |
0.60 0.67 |
12,620 12,570 |
21.0 21.4 |
11,870 11,800 |
18.7 19.4 |
10,920 10,880 |
16.6 17.1 |
9,950 9,890 |
14.7 15.2 |
96151 93239 |
| AT361ZC AT3615ZC |
36″ 36″ |
Belt Belt |
1 1-1/2 |
1010 1075 |
1.35 1.63 |
15,850 16,910 |
13.4 11.8 |
15,150 16,260 |
12.4 11.0 |
14,560 15,700 |
11.7 10.4 |
13,930 15,110 |
11.0 9.8 |
04084 04085 |
| AT481ZC AT4815ZC AT482ZC |
48″ 48″ 48″ |
Belt Belt Belt | 1 1-1/2 2 |
575 635 675 |
1.26 1.69 2.20 |
25,000 27,500 28,900 |
24.1 18.8 15.9 |
23,500 26,100 27,800 |
21.7 17.2 15.0 |
22,000 24,800 26,600 |
19.6 15.9 14.0 |
20,200 23,300 25,100 |
17.5 14.5 13.0 |
92086 92092 04100 |
Note:
1. The ratings shown are based on tests and procedures performed at the BESS Lab, University of Illinois in accordance with ASHRAE Standard 51-1999.
2. BHP values were not measured at BESS Lab. The BHP values shown were derived from actual Watt measurements using motor efficiency values supplied by the motor manufacturers.
3. Performance shown is for installation type A: Free inlet, Free outlet.
4. Speed (RPM) shown is nominal. Performance is based on actual test speed.
5. Performance ratings include the effects of a discharge cone, guard and inlet shutter in the airstream.