Aerotech Apex Fans

ApexTM Fans

36″, 48″, 51″

Aerotech Apex fanApex Fan Line

Our circulation fans provide the air velocity and volume required to maintain production through the heat of the summer. The Apex™ fan lines are designed to be energy efficient while providing maximum air flow. It’s time to get serious about cooling your investments.

Economical high performance ApexTM fans with “air-foil” technology provide the features you like at a price you’ll love. High efficiency and high airflow coupled with outstanding durability and reliability are hard to beat.

The ApexTM line is ideal for noncorrosive environments. Heavy-gauge galvanized-steel panels, supports and high strength galvanized tubular struts provide a superior core for the fan.

High quality, greaseable, cast iron pillow block bearings assure longer life. Large pulleys provide greater belt wrap. Belt tension can be lower without slippage. Less stress increases life for the belts and bearings. Wide selection of sizes, housings, discharge cones, guards and shutter options. Our ApexTM is sure to fit your application.

The 51 ” fan features improved design with cone and tilt housing allowing fan installation side-by-side in 5’O.C. buildings. The 51 ” fan is available with tilt housing and cone only.

Aerotech Apex fans in the fieldFeatures:

  • High efficiency motors
  • Aerolink Plus belts provides easy belt tensioning, reduce vibration wear and stretching for longer life
  • Outstanding value in noncorrosive environments
  • Top quality heavy-gauge galvanized-steel panels, supports and tubular struts
  • Cast-aluminum propellers feature limited lifetime warranty
  • High quality AeroLink PlusTM belts offer a longer life
  • High quality cast iron pillow block bearings assure longer life
  • Single phase, 3 phase, 2 speed and 50 hertz motors available for most models
  • Contact USGR at 888-334-1440 or email usgr@usgr.com for more information

Housing and Panel Fan

Apex tilt housing
Apex tilt housing with guard
Apex panel fan
Full depth galvanized tilt housing with guard and plastic shutter
Full depth galvanized tilt housing with guard and plastic shutter
Apex panel fan can be used with any housing options shown.

Belt Options

AeroLink Plus belt
Belt tightener
AeroLink PlusTM belt
Reduced vibration, wear and stretching add up to long life. In addition, AeroLink Plus belts eliminate the need for a belt tightener.
Belt Tightener
If a belt tightener is preferred, we offer a revolutionary new design.

 

Performance Information: Fan complete with tilt housing, discharge cone, and inlet shutter.
0.0″ SP 0.05″ SP 0.10″ SP 0.15″ SP
Catalog
No.		 Prop.
Dia.		 Drive
Type		 Motor
HP		 Prop
RPM		 Max.
BHP		 CFM CFM Watt CFM CFM Watt CFM CFM Watt CFM CFM Watt
AX36TCP
AX365TCP		 36″
36″		 Direct
Belt		 1/2
1/2		 850
775		 0.59
0.67		 11,550
12,570		 20.1
21.9		 10,690
11,730		 17.9
19.5		 9,740
10,760		 15.7
17.1		 8,600
9,640		 13.5
15.0
AX481TCP
AX4815TCP		 48″
48″ 		 Belt
Belt		 1
1-1/2		 575
625		 1.30
1.68		 25,500
26,750		 22.8
18.4		 24,200
25,470		 20.7
16.8		 22,700
24,030		 18.6
15.4		 20,900
22,510		 16.8
14.1
AX511TCP
AX5115TCP
AX512TCP		 51″
51″
51″		 Belt
Belt
Belt		 1
1-1/2
2		 550
595
635		 1.30
1.66
2.2		 26,500
28,300
31,400		 23.5
20.5
17.8		 25,100
26,900
30,100		 21.4
18.7
16.8		 23,300
25,100
28,600		 19.1
16.9
15.6		 21,200
23,300
27,300		 16.9
15.3
14.6

Note:
1. Speed (RPM) shown is nominal. Performance is based on actual test speed.
2. BHP values shown include all drive losses.
3. CFM/Watt values shown are based on actual Watt input measurements with
single-phase motors. CFM/Watt values include all drive losses.