Air Recirculator EMS 30

Euroemme Fans:
Air Recirculator EMS 30

Normally
sold with front and back screen but
not louvers. Air recirculator fans used in many industries.

EMS30 Munters/Euroemme FansEuroemme EMS30 is the ideal air recirculation fan whenever high air movement capacity is required. The unique propeller design is self-cleaning and allows the highest efficiency to be reached.

The square fan housing and air conveyor (venturi) arc made of a strong galvanized sheet-steel. The 6-blade propeller is statically and dynamic balanced for low noise and low vibration. The propeller is available in stainless steel, galvanized steel and pre-coated and galvanized steel.

To improve aerodynamic efficiency, the fan has been developed in Munters euroemme’s R&D lab. The test chamber has been built according to ANSI / AMCA 210-135 Figure 15 specifications. Construction details and airtightness have been verified by personnel of the BESS Lab at the Agricultural
Engineering Department, University of Illinois – USA.

Download Brochure

Euroemme Propeller

The propeller is attached to a large v-belt pulley in which is embedded a double ball bearing protected against water. The belt transmission ensures low propeller rpm, which ensures high efficiency, low energy consumption as well as low noise.

Euroemme Equipment

  • Fan housing and venturi made of strong galvanized sheet-steel.
  • Each motor is individually tested for IN” % quality
    control.
  • Central hub and v-belt pulley are made from die-cast aluminum.
  • Propeller is statically and dynamically balanced.
  • Special threaded bushes on fan’s side panels permit the
    fan to be easily hung.
  • Every fan is individually checked for quality.

EMS30

EMS30-X-X-X e.g., EMS30-b-2-wp-wm

  • b : Code for electric motor according
    to above table.
  • 2 : Code for the type of propeller blades.
    1. Galvanized propeller blades.
    2. Precoated propeller blades.
    3. Stainless steel propeller blades.
  • wp-wm : Options codes
    • wp: Fan equipped with plastic CE
      protection for belt and pulleys (on mesh side, standard
      in Europe)
    • np: Fan delivered without plastic
      CE protection for belt and pulleys (on mesh side, standard
      outside Europe)
    • wm: Fan delivered with pyramidal
      shape mesh for CE protection on shutter side.
    • nm: Fan delivered without pyramidal
      shape mesh for CE protection on shutter side (standard)

Euroemme Motor Specifications

EMS 30
Code 		Nominal power Type
  phases 		Speed Frequency[hz] Voltage[V] Current[A] rpm
[w] [hp]
a 370 0.5 1 single 50 230 3 1,380
b 370 0.5 1 multi* 50 230 3 1,380
c 370 0.5 1 single 60 220 – 240 3.3 1,700
d 370 0.5 3 single 50 230 / 400 2.3 / 1.3 1,400
e 370 0.5 3 single 60 230 / 400 2.3 / 1.3 1,700
f 370 0.5 3 multi* 50 230 / 400 2.6 / 1.5 1,380
g 370 0.5 3 multi* 60 230 / 400 2.6 / 1.5 1,670
h 550 0.75 1 single 50 230 4 1,400
i 550 0.75 1 multi* 50 230 4 1,400
k 550 0.75 1 single 60 220 – 240 4.4 1,700
l 550 0.75 3 single 50 230 / 400 2.8 / 1.6 1,400
m 550 0.75 3 single 60 230 / 400 2.8 / 1.6 1,700
n 550 0.75 3 multi* 50 230 / 400 3.2 / 1.8 1,380
o 550 0.75 3 multi* 60 230 / 400 3.2 / 1.8 1,650
* Multi speed motors
must be regulated with auto-transformer which is not supplied.

Technical Specifications

  05 hp 0.75
hp
Weight of fully equipped fan1 [kg] 38 39
Nominal propeller speed [rmp] 590 640
Airflow at 0 Pa1 [m3/h] [cfm] 13,570 [7,990] 14,680 [8,640]
Specific performance at 0 Pa1 [m3/wh] [cfm/w] 20.2     [11.9] 17.8     [10.5]
Propeller diameter [mm] [inch] 760 [30]
Number of blades 6
Max. operating temperature [°C] [°F] 50 [122]
IEC protective class of electric motor IP55
Electric motor winding insulation grade F
1 All values refer
to 3 phases 50 Hz single speed motor.
N.B Airflow data are measured at standard condition (20
°C, 1013 hPa).

EMS 30 is developed and produced by Munters euroemme S.p.A., Italy.

FacebookInstagramPinterestYouTube