Corrugated Polycarbonate Sheets
as Greenhouse Coverings

High quality sheets with superior optical and physical properties.
USGR corrugated polycarbonate solid sheets are virtually unbreakable, easy to install and highly
transparent. Coextruded with a UV protection layer, corrugated polycarbonate solid sheets are available in a large variety of colors and shapes for a wide range outdoor applications.

Main Advantages
» 100% waterproof
» Practically unbreakable
» Lightweight and flexible
» High transmittance
» Highly resilient
» Easy to transport
» Easy to handle, cut and install

PROPERTIES
» Airtight sealing avoiding infiltration of water, dust, and foreign matter
» Anti-noise preventing vibration propagation
» Available under wave and over wave

Assembly on cover or wall
» Start screwing where the sheet overlaps the previously installed sheet
» Fasten the sheets to purling by placing screws in the ridge of the sheets
» In case of installing on a wall a screw can be placed in the valley of the sheet
» Usage of a spacer is recommended
» Zone (Zl) Ridge, Zone (Z2)
» Minimum slope is 10% (5.7°)

Recommendations on installation
» Install the sheets with the UV side facing upwards and once it has been installed remove the tape and labels.
» Do not leave the sheets with masking on under the sun as it can become impossible to be removed.
» Use 50.8mm (2”) screws for the installation of Greca and Sinus sheets.
» Use 76.2mm, 3” screws for Big Wave sheets.
» The usage of 79mm (3.1) diameter EPDM washer is recommended for fastening screws.
» Screws must be screwed perpendicular to the sheets.
» Do not tighten the screws too much as it can damage the EPDM synthetic rubber washer.
» The diameter of the hole for the screws is 3-4mm (0.118” – 0.157”).

Solid corrugated polycarbonate is designed with additional stiffness to resist wind and snow loads, making CORRUGAL an ideal roofing material. With a large variety of shapes and colors, including clear corrugated polycarbonate can be found in skylights, pergolas and fencing.

CORRUGATED POLYCARBONATE SOLID SHEETS

High quality sheets with superior optical and physical properties. USGR corrugated polycarbonate solid sheets are virtually unbreakable, easy to install and highly transparent. Coextruded with a UV protection layer, USGR Corrugated Polycarbonate is available in a large variety of colors and shapes for a wide range outdoor applications.

Our Corrugated Polycarbonate is available in 6 shapes including Sinus, Greca, P-7 (Big Wave) and Trapezoid. Among the 18 color options available are; clear, blue, pearl, bronze, opal and six metallic options. Sheets are available under wave and over wave format.

USGR EXTRUDED CORRUGATED POLYCARBONATE SHEETS are produced according to internal ISO standards and are cost-effective in a wide range of outdoor applications, such as canopies, industrial areas covers and others.

Our extruded polycarbonate sheets provide long-life products with high transparency, outstanding impact strength, weathering and ageing resistance with UV protective layer, safe and easy fabrication and handling. Corrugated sheets can be anti-fog coated upon request, orders may be subject to minimum quantities.

USGR corrugated polycarbonate solid sheets are virtually unbreakable, easy to install.

COLORS – 18 colors available to choose from.

SUPERIOR QUALITY – Produced with a coextruded UV protection layer.

EASY TO FABRICATE AND INSTALL– Lightweight and flexible, ease of transportation.

MODERN DESIGNS – Clear sheet allows 89% light transmission.

Download brochure